Basically what we want to do is store one value for different types of phone numbers that a person has in one column instead of having multiple columns for each different type. This is just one purpose for doing this, but there are countless other reasons you may want to store data this way. So in order to do this we need to save the data in a binary format, so we can then use the bitwise (&) operator to retrieve the data. So the first thing we need to do is figure out the values we want to store and then use a binary representation for each of these values. Here is the representation of the data for each of the different phone types we will store.
- 2 = home phone number
- 4 = home fax number
- 8 = mobile phone number
- 16 = office phone number
- 32 = office fax number
- 64 = toll free office number
- 128 = toll free office fax number
To better understand how this will work, let's say someone has both a home number and an office number. The value that would be stored in the data column would be 18 (2 home + 16 office). Another example could be home number and home fax number which would be 6 (2 home + 4 home fax).
The use of the bitwise operator comes in play when updating and reading data from this column. What the bitwise operator allows you to do is to compare two different values at a binary level and tell you whether the two numbers intersect.
Here is a simple example of this operator at work. We are doing a simple comparison of the first value against the second value. Since the numbers are based on binary representation, the numbers increase as follows: 1,2,4,8,16, etc... So for these numbers we want to see where value one intersects with value two. Here are the examples:
- For line 1, 1 is not in 0 (0 = 0), so this returns 0.
- For line 2, 1 is in 1 (0,1 = 1), so this returns 1.
- For line 3, 1 is not in 2 (0,2 = 2), so this returns 0.
- For line 4, 1 is in 3 (0,1,2 = 3), so this returns 1.
- For line 5, 1 is not in 4 (0,4 = 4), so this returns 0.
- For line 6, 1 is in 5 (0,1,4 = 5), so this returns 1.
To take this a step further and create a representation for our telephone number problem, the following code is a simple set of code that sets the indicator either on=1 or off=0 for each of the components of the phone number indicator. In addition, to setting the indicators for each value to either 1 or 0, we are also using the power indicator to allow us to get the binary representation easier. The first few lines set the values and prints the binary representation and the second set prints out each line that is true based on the binary representation.
Here are some example runs:
|Example 1 Results|
|Example 2 Results|
Has Toll Free Fax
|Example 3 Results|
Has Home Fax
Has Office Fax
Has Toll Free Office
Has Toll Free Fax
As you can see the use of the bitwise (&) operator allows us to compare the values to see if there are any intersecting values in the number. This may not be a perfect solution to your data storage needs, but it does give you another option for storing and retrieving your data.